HCR-100
Description
The HCR-100 is a general purpose UHF receiver operating on 433.92MHZ. Four single pole double throw (SPDT) outputs are available to control external devices. The receiver is designed for use with 4 channel key fobs such as our HCT-4 or FOB-4S. The system uses code hopping technology for secure RF transmissions.
The HCR-100 is an improvement on our popular HCR-15 receiver. The four relay outputs can be programmed to work with different buttons on individual fobs. This allows full customization to suit the customer the HCR-100 also has timing options for relays 1 and 2 making it suitable for use with electric door locks.
Documentation
HCR-15
Description
The HCR-15 is a general purpose UHF receiver operating on 433.92MHZ. Four single pole double throw (SPDT) outputs are available to control external devices. The receiver is designed for use with 4 channel key fobs. The system uses code hopping technology for secure RF transmissions.
The HCR-15B version of the product is supplied in an IP65 rated ABS plastic enclosure which allows installation of the receiver in an external environemnt with water resistance. Cable entry is via a cable gland at the bottom of the case. The antenna tube is weatherproof and detachable.
Documentation
RE005EV2
Description
The RE005EV2 RF Arming Kit is designed to prodvide a convenient ON/OFF control for the Solution 16 alarm panels. Provision is also made for the control of up to two external devices via on board relays.
Documentation
WE800EV2
Description
The WE800EV2 RF Arming Kit is designed to prodvide a convenient ON/OFF control for the Solution 8XX series of alarm panels. Provision is also made for the control of up to two external devices via on board relays.
Documentation
Don't Have Adobe Reader?
If you cannot view the PDF file after clicking on the relevant product image, you may not have Adobe Reader installed. Please click on the link below to visit their website to download the required software.
Click here to visit the Adobe website.